Arduino & Accessories

Arduino Nano V3.0 FT232 with Mini USB

$18.50

(Pick up in store only)

Arduino Nano is a Simple ultra small i/o platform based and open source code, with the previous version of the USB Arduino Arduino Nano Diecimila, a great advantage in the volume, Arduino can be used to develop electronic products need to operate independently, and has an interactive effect; can also be used to develop a computer connected with with Flash, Processing, Max/Msp, PD, VVVV and other interactive works together to complete the software.

Technical parameters of Nano Arduino:

1.12 digital input / output port D2~D13,

2.8 analog input port A0~A7

3.1 on the TTL level of the serial port RX/TX

4.6 PWM ports, D3, D5, D6, D9, D10, D11,

5 using Atmega328P-AU Atmel single chip microcomputer

6 support USB download and power supply

7 support external 5V~12V DC power supply

8 support 9V battery power supply

9 support ISP Download

This product contains:

1 a piece of Nano Arduino

2 using FTDI232RL

3 chip physical map

Arduino UNO Starter Kit

$89.00
Christmas special
$69.00

(Pick up in store only)

Package :

1. 1pcs x for Arduino UNO board	19. 1pcs x 8*8 Dot matrix module
2. 1pcs x USB cable	20. 1pcs x 1-digit display tube
3. 1pack Jump cable	21. 1pcs x Stepping motor
4. 1pcs x Breadboard	22. 1pcs x Stepping motor driver board
5. 5pcs x LED Light	23. 1pcs x 9g servo
6. 1pack Resistor	24. 1pcs x RGB module
7. 1pcs x 10P Female to male dupond line	25. 1pcs x IIC 1602 LCD
8. 1pcs x Potentiometer	26. 1pcs x XY joystick module
9. 2pcs x Buzzer	27. 1pcs x Temperature module
10. 1pcs x 74HC595	28. 1pcs x Water test module
11. 1pcs x Infrared receiver	29. 1pcs x RFID module
12. 1pcs x LM35 temperature sensor	30. 1pcs x RFID Keychain
13. 1pcs x Flame sensor	31. 1pcs x RFID white card
14. 2pcs x Ball switch	32. 1pcs x Sound module
15. 3pcs x Photoresistor	33. 1pcs x Relay module
16. 4pcs x Key button	34. 1pcs x Clock module
17. 1pcs x Remote control	35. 1pcs x 4*4 Key board
18. 1pcs x 4-digit display tube	36. 1pcs x 9V battery snap

Raspberry Pi Starter Learning Kit

$59.00

(Pick up in store only)

Package :

1. 1x Triaxial Accelerometer Sensor Module (ADXL345)	28. 1x RGB LED
2. 1x DHT-11(Digital Temperature & Humidity Sensor)	29. 8x Red LED
3. 1x Ultrasonic Distance Sensor Module	30. 4x Green LED
4. 1x PIR Movement Sensor	31. 4x Yellow LED
5. 1x PS2 Joystick Module	32. 4x Blue LED
6. 1x LCD1602	33. 4x Button (large)
7. 1x Servo	34. 5x Button (small)
8. 1x Stepper Motor	35. 1x Button cap (red)
9. 1x Stepper Motor Driver Module (Based on ULN2003A)	36. 1x Button cap (white)
10. 1x ADC0832	37. 2x Button cap (blue)
11. 1x L9110 motor driver	38. 16x Resistor (220Ω)
12. 1x DC Motor	39. 10x Resistor (1kΩ)
13. 1x 4*4 Matrix Keyboard	40. 10x Resistor (10kΩ)
14. 1x Breadboard Power Supply Module	41. 2x Potentiometer (10KΩ
15. 1x 40 pin GPIO Extension Board	42. 5x Capacitor (104)
16. 1x 40 pin GPIO Cable	43. 4x Capacitor (10uF)
17. 2x Light Sensor (Photoresistor)	44. 2x 1N4148 Diode
18. 2x Analog Temperature Sensor (Thermistor)	45. 2x 1N4001 Diode
19. 1x Relay	46. 4x NPN Transistor (8050)
20. 1x Active Buzzer	47. 4x PNP Transistor (8550)
21. 1x Passive Buzzer	48. 1x Breadboard
22. 1x 7-Segment Display	49. 40x Male to Male Jumper Wires
23. 1x 4-bit 7-segment Display	50. 20x Male to Female Jumper Wires
24. 1x LED Bar Graph Display	51. 20x Female to Female Jumper Wires
25. 1x Dot-matrix Display	52. 1x Header (40pin)
26. 2x 74HC595	53. 1x Band Resistor Card
27. 2x Switch	54. 1x Project Box

3D Printer Kit with 2004 LCD control Panel

$69.00

(Pick up in store only)

Package :

1 x Ramps 1.4	1 x adapter
1 x 2004 LCD control panel	2 x cable
1 x Mega 2560 r3	5 x A4988 module with heatsink
1 x USB cable

Sensor Kit

$39.00

24 pcs Package :
1 x 3W led	1 x IR receiver	1 x 3 color led module
1 x 5V relay module	1 x flame sensor	1 x temperature sensor
1 x 1307 clock module	1 x laser head sensor	1 x tempersture and humidity sensor
1 x key switch module	1 x metal touch module	1 x passive buzzer
1 x obstacle avoidance sensor	1 x mini reed module	1 x linear hall sensor
1 x high sensitivity microphone	1 x magic light cup	1 x A rotary encoder
1 x photoresistor	1 x knock sensor	1 x hunt sensor
1 x infrared emission	1 x tilt switch	1 x active buzzer

L298N Dual H Bridge DC Stepper Motor Driver Board

$9.99

Detailed:

The drive chip: double H bridge driver L298N chip

The driving part of the terminal power supply scope VMS:+5V ~ +35V

The driving part of the peak current Io: 2A / bridge

The logical part Vss terminal power supply range: 4.5 to 5.5V

The logical part of the working current range: 0 ~ 36 ma

Control signal input voltage range: 4.5 5.5V low level high level 0V

Maximum power consumption: 20W

Storage temperature: 25 degree ~+ 130 degree

Other functions: control the direction of light, the power indicator, current detection, logical part within plate for electrical interfaces

Driver board size: 55 x 60 x 30mm

L298N Dual H Bridge Stepper Motor Driver Board for Arduino

$9.99

Detailed:

Double H bridge drive	Logical current: 0mA-36mA
Chip: L298N	Drive current: 2A (MAX single bridge)
Logical voltage: 5V	Storage temperature: -20 to +135
Drive voltage: 5V-35V	Max power: 25W
Size: 43x43x27mm

Note:
This module has a built in 5V power supply, when the driving voltage is 7V-35V, this supply is suitable for power supply, DO NOT input voltage to +5V supply interface, however ledding out 5V for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENA enable IN3 IN4 control OUT3 OUT4

Arduino 5V 4 Channel Relay Shield

$12.00

Specification

Equiped with high -current relay, AC 250V 10A DC30V 10A	Standard interface that can be expanded in a variety of development boards
Support 5V	Equipped with screw holes for easy installation
Independent wiring in contact area , safe and reliable	Applicable to a variety of platforms including Arduino / AVR / ARM

Jumper Wires
	Male to Male 7 Colors , 65 pcs / Bundle $9.95
	Female to Female 8 Colors , 50 pcs / Bundle $9.95
	Male to Female 5 Colors , 50 pcs / Bundle $9.95

Cases
Raspberry Pi Case For Raspberry Pi 3 Model B White Raspberry coloured enclosure with white removable lid and sides ( GPIO side and HDMI side) shrink wrapped with 4 rubber feet Dimensions: 96 x 25 x 70mm $6.99	Raspberry Pi Case For Raspberry Pi 3 Model B Black Raspberry coloured enclosure with white removable lid and sides ( GPIO side and HDMI side) shrink wrapped with 4 rubber feet Dimensions: 96 x 25 x 70mm $6.99
ABS Case for Raspberry Pi Dimensions: 90 x 25 x 70mm $3.99