Watertight ABS Plastic

Watertight ABS Plastic - "Styled" Lid (1555 Series)

Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
"Styled" lid version has three main advantages over our flat lid (1554 series) - also see photo features below:
- smooth recessed surface on lid for a membrane keypad or label
- standoffs molded in the interior of the lid (except for 1555BGY) - designed for #6 self tapping screws
- more modern "styled" look vs. our traditional flat lid (1554 series)
Material - General purpose ABS plastic (material carries a UL flammability rating of UL94 HB). Not recommended for outdoor use (please see our polycarbonate 1555 series).
Color is a light gray (RAL 7035).
Gasketed lid with two piece "tongue & groove" construction provides protection against access of oil, dust and water.
Gasket is factory poured using high temperature U.L. listed - silicone rubber gasket material.
Designed to meet IP 66 & NEMA 4, 4X, 12 & 13 ratings.
Lid is secured with self captivating - M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly). All stainless steel hardware to avoid corrosion caused by dissimilar metals. See photo features below.
Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs - molded in - except 1555CGY...
- Options vary with size. Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (1555BGY). See photo tables for internal views of each size...
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size enclosure (1555BGY)...
Link here to photo tables of each part number

Part Number	Reader File	Units	Length	Width	Height (Includes Lid)
1555BGY $9.87		mm	65	65	40
inches	2.6	2.6	1.6
1555EGY $12.26		mm	90	90	60
inches	3.5	3.5	2.4
1555CGY $10.88		mm	120	65	40
inches	4.7	2.6	1.6
1555DGY $12.14		mm	120	65	60
inches	4.7	2.6	2.4
1555FGY $14.91		mm	120	90	60
inches	4.7	3.5	2.4
1555GGY $14.35		mm	120	90	80
inches	4.7	3.5	3.15
1555NGY $17.37		mm	120	120	60
inches	4.7	4.7	2.4
1555PGY $18.56		mm	120	120	80
inches	4.7	4.7	3.15
1555JGY $16.79		mm	160	90	60
inches	6.3	3.5	2.4
1555KGY $18.56		mm	160	90	90
inches	6.3	3.5	3.5
1555RGY $25.21		mm	160	160	60
inches	6.3	6.3	2.4
1555SGY $26.95		mm	160	160	90
inches	6.3	6.3	3.5
1555HGY $19.14		mm	180	120	60
inches	7.1	4.7	2.4
1555TGY $25.21		mm	180	120	90
inches	7.1	4.7	3.5
1555UGY $27.48		mm	200	120	90
inches	7.9	4.7	3.5
1555VGY $34.31		mm	240	160	90
inches	9.4	6.3	3.5

"Styled" Lid Top
(smooth recessed surface for a
membrane keypad or label)

"Styled" Lid Interior
(standoffs molded in)

Stainless steel inserts & lid screws.
No corrosion caused by dissimilar metals.

Lid & mounting holes outside
of the gasket seal.

Lid mounting holes outside of the
factory poured silicone rubber gasket seal.

Maximized mounting options to each enclosure size
(DIN rail mount, brass insert standoffs, vertical P.C. card guides & self tapping standoffs)

Feet Kit (Part Number 1554FT ):


Feet Kit

Feet allow box to mount horizontally or vertically

Part Number 1554FT
$7.92

Feet are molded in rugged polycarbonate.
All hardware is stainless steel.
See the assembly diagram for more details.
Kit includes 4 feet, 4 stainless steel screws & nuts (as shown).
Works only with our 1554 and 1555 series enclosures.

Panels:


Panel	Panel Mounted in Enclosure Body (Hardware included)	Panel Mounted in Lid (Hardware not included)

Heavy duty panels for mounting components.
Mounts into brass inserts in the bottom of the enclosure using M3 x 8mm machine screws (Part No. 1591MM100 - pack of 100).
Mounts into plastic standoffs in the lid of the enclosure using #6 x 1/4" machine screws (Part No. 1598ATS100 - pack of 100).
Galvanized 16 ga. steel.
Panel includes mounting hardware for enclosure body (M3 x 8mm machine screws).

Part No.	Use With...	Units	Length	Width
1554BPL $6.70	All 1554 & 1555 Series "B" size enclosures	mm	56	59
1554BPL $6.70	All 1554 & 1555 Series "B" size enclosures	inches	2.2	2.2
1554CPL $7.79	All 1554 & 1555 Series "C" & "D" size enclosures	mm	112	53
1554CPL $7.79	All 1554 & 1555 Series "C" & "D" size enclosures	inches	4.4	2.1
1554EPL $8.30	All 1554 & 1555 Series "E" size enclosures	mm	79	79
1554EPL $8.30	All 1554 & 1555 Series "E" size enclosures	inches	3.1	3.1
1554FPL $8.26	All 1554 & 1555 Series "F" & "G" size enclosures	mm	109	79
1554FPL $8.26	All 1554 & 1555 Series "F" & "G" size enclosures	inches	4.3	3.1
1554HPL $8.96	All 1554 & 1555 Series "H" & "T" size enclosures	mm	168	107
1554HPL $8.96	All 1554 & 1555 Series "H" & "T" size enclosures	inches	6.6	4.2
1554JPL $8.07	All 1554 & 1555 Series "J" & "K" size enclosures	mm	147	76
1554JPL $8.07	All 1554 & 1555 Series "J" & "K" size enclosures	inches	5.8	3.0
1554NPL $7.86	All 1554 & 1555 Series "N" & "P" size enclosures	mm	108	107
1554NPL $7.86	All 1554 & 1555 Series "N" & "P" size enclosures	inches	4.24	4.2
1554RPL $10.08	All 1554 & 1555 Series "R" & "S" size enclosures	mm	151	147
1554RPL $10.08	All 1554 & 1555 Series "R" & "S" size enclosures	inches	5.94	5.8
1554UPL $9.45	All 1554 & 1555 Series "U" size enclosures	mm	193	107
1554UPL $9.45	All 1554 & 1555 Series "U" size enclosures	inches	7.6	4.2
1554VPL $12.11	All 1554 & 1555 Series "V" size enclosures	mm	231	145
1554VPL $12.11	All 1554 & 1555 Series "V" size enclosures	inches	9.1	5.7

Wall or shelf mount through back of unit (enclosure shown upside down)	Lid mounting holes outside of the factory poured silicone rubber gasket seal.
click to enlarge	click to enlarge